Introduction

This document describes the output produced by the pipeline. Most of the plots are taken from the MultiQC report, which summarises results at the end of the pipeline.

The directories listed below will be created in the results directory after the pipeline has finished. All paths are relative to the top-level results directory.

General

Output files
  • *.mzTab
  • *.tsv

The mzTab output file follows the a HUPO-PSI format and combines all information of the sample-condition group extracted from a database search throughout the pipeline. A detailed explanation of the respective entries are elaborately explained here. MzTab files are compatible with the PRIDE Archive - proteomics data repository and can be uploaded as search files.

MzTab files contain many columns and annotate the most important information - here are a few outpointed:

PEP  sequence  accession  best_search_engine_score[1]  retention_time  charge  mass_to_charge  peptide_abundance_study_variable[1]

Most important to know is that in this format we annotated the Comet XCorr of each peptide identification in the best_search_engine_score[1] column and peptide quantities in the peptide_abundance_study_variable columns. If --skip_quantification is specified the best_search_engine_score[1] holds the percolator q-value.

The TSV output file is an alternative output of OpenMS comprising similar information to the mzTab output. A brief explanation of the structure is listed below. See documentation of the format or PSI documentation for more information about annotated scores and format.

MAP contains information about the different mzML files that were provided initially

#MAP    id    filename    label    size

RUN contains information about the search that was performed on each run

#RUN    run_id  score_type      score_direction date_time       search_engine_version   parameters

PROTEIN contains information about the protein ids corresponding to the peptides that were detected (No protein inference was performed)

#PROTEIN        score   rank    accession       protein_description     coverage        sequence

UNASSIGNEDPEPTIDE contains information about PSMs that were identified but couldn’t be quantified to a precursor feature on MS Level 1

#UNASSIGNEDPEPTIDE      rt      mz      score   rank    sequence        charge  aa_before       aa_after        score_type      search_identifier       accessions      FFId_category   feature_id      file_origin     map_index       spectrum_reference      COMET:IonFrac   COMET:deltCn    COMET:deltLCn   COMET:lnExpect  COMET:lnNumSP   COMET:lnRankSP  MS:1001491      MS:1001492      MS:1001493      MS:1002252      MS:1002253      MS:1002254      MS:1002255      MS:1002256      MS:1002257      MS:1002258      MS:1002259      num_matched_peptides    protein_references      target_decoy

CONSENSUS contains information about precursor features that were identified in multiple runs (eg. run 1-3 in this case)

#CONSENSUS      rt_cf   mz_cf   intensity_cf    charge_cf       width_cf        quality_cf      rt_0    mz_0    intensity_0     charge_0        width_0 rt_1    mz_1    intensity_1     charge_1        width_1 rt_2    mz_2    intensity_2     charge_2        width_2 rt_3    mz_3    intensity_3     charge_3        width_3

PEPTIDE contains information about peptide hits that were identified and correspond to the consensus features described below

#PEPTIDE        rt      mz      score   rank    sequence        charge  aa_before       aa_after        score_type      search_identifier       accessions      FFId_category   fea

Intermediate results

This folder contains the intermediate results from various steps of the MHCquant pipeline (e.g. (un)filtered PSMs, aligned mzMLs, features)

Output files
  • intermediate_results/

    • alignment: Contains the trafoXML files of each run that document the retention time shift after alignment in quantification mode.

    • comet: Contains pin files generated by comet after database search

    • percolator

      • {Sample}_{Condition}_psm.idXML: File holding extra features that will be used by percolator. Created by PSMFeatureExtractor.
      • {Sample}_{Condition}_pout.idXML: Unfiltered percolator output.
      • {Sample}_{Condition}_pout_filtered.idXML: FDR-filtered percolator output.
    • features: Holds information of quantified features in featureXML files as a result of the FeatureFinderIdentification in the quantification mode.

  • ion_annotations

    • {Sample}_{Condition}_all_peaks.tsv: Contains metadata of all measured ions of peptides reported after peptide identification.

    • {Sample}_{Condition}_matching_ions.tsv: Contains ion annotations and additional metadata of peptides reported after peptide identification.

  • refined_fdr (Only if --refine_fdr_on_predicted_subset is specified)

    • *merged_psm_perc_filtered.mzTab : This file export filtered percolator results (by q-value) as mzTab.

    • *_all_ids_merged.mzTab : Exportas all of the psm results as mztab.

    • *perc_subset.idXML : This file is the outcome of a second OpenMS PercolatorAdapter run.

    • *pred_filtered.idXML : Contains filtered PSMs prediction results by shrinked search space (outcome mhcflurry).

    • {ID}_-_{filename}_filtered : An outcome file of OPENMS_IDFILTER_REFINED.

VCF

Reference fasta

Output files
  • *_vcf.fasta: If --include_proteins_from_vcf is specified, then this fasta is created for the respective sample
The fasta database including mutated proteins used for the database search

Neoepitopes

These CSV files list all of the theoretically possible neoepitope sequences from the variants specified in the vcf and neoepitopes that are found during the mass spectrometry search, independant of binding predictions, respectively

Found neoepitopes

Output files
  • class_1_bindings/

    • *found_neoepitopes_class1.csv: Generated when --include_proteins_from_vcf and --predict_class_1 are specified
  • class_2_bindings/

    • *found_neoepitopes_class2.csv: Generated when --include_proteins_from_vcf and --predict_class_2 are specified

This CSV lists all neoepitopes that are found during the mass spectrometry search, independant of binding predictions. The format is as follows:

peptide sequence   geneID

vcf_neoepitopes

Output files
  • class_1_bindings/

  • *vcf_neoepitopes_class1.csv: Generated when --include_proteins_from_vcf and --predict_class_1 are specified

  • class_2_bindings/

  • *vcf_neoepitopes_class2.csv: Generated when --include_proteins_from_vcf and --predict_class_2 are specified

This CSV file contains all theoretically possible neoepitope sequences from the variants that were specified in the vcf. The format is shown below

Sequence        Antigen ID       Variants

Class prediction

Class (1|2) bindings

Output files
  • class_1_bindings/

  • *predicted_peptides_class_1.csv: If --predict_class_1 is specified, then this CSV is generated

  • class_2_bindings/

  • *predicted_peptides_class_2.csv: If --predict_class_2 is specified, then this CSV is generated

This folder contains the binding predictions of all detected class 1 or 2 peptides and all theoretically possible neoepitope sequences The prediction outputs are comma-separated table (CSV) for each allele, listing each peptide sequence and its corresponding predicted affinity scores:

peptide   allele   prediction   prediction_low   prediction_high   prediction_percentile

MultiQC

Output files
  • multiqc/

  • multiqc_report.html: a standalone HTML file that can be viewed in your web browser.

  • multiqc_data/: directory containing parsed statistics from the different tools used in the pipeline.

  • multiqc_plots/: directory containing static images from the report in various formats.

MultiQC is a visualization tool that generates a single HTML report summarising all samples in your project. Most of the pipeline QC results are visualised in the report and further statistics are available in the report data directory.

Results generated by MultiQC collate pipeline QC from supported tools e.g. FastQC. The pipeline has special steps which also allow the software versions to be reported in the MultiQC output for future traceability. For more information about how to use MultiQC reports, see http://multiqc.info.

Pipeline information

Output files
  • pipeline_info/

    • Reports generated by Nextflow: execution_report.html, execution_timeline.html, execution_trace.txt and pipeline_dag.html.
    • Reports generated by the pipeline: software_versions.yml.
    • Reformatted samplesheet files used as input to the pipeline: samplesheet.valid.csv.
    • Parameters used by the pipeline run: params.json.

Nextflow provides excellent functionality for generating various reports relevant to the running and execution of the pipeline. This will allow you to troubleshoot errors with the running of the pipeline, and also provide you with other information such as launch commands, run times and resource usage.