nf-core/pixelator
Pipeline to generate Molecular Pixelation data with Pixelator (Pixelgen Technologies AB)
1.0.1
). The latest
stable release is
1.3.1
.
Introduction
Samplesheet input
You will need to create a samplesheet with information about the samples you would like to analyse before running the pipeline. Use this parameter to specify its location.
--input '[path to samplesheet file]'
An example samplesheet has been provided with the pipeline.
Format
The samplesheet is a CSV or TSV formatted file with a few required and some optional columns. You can export to CSV from spreadsheet programs such as Microsoft Excel, Google Sheets and LibreOffice Calc.
Following table provides an overview of all possible columns in the samplesheet. The samplesheet can have as many columns as you desire, however, there is a strict requirement for the first 5 columns to match those defined in the table below.
Below is an example of a simple samplesheet with two samples.
sample,design,panel,fastq_1,fastq_2
uropod_control,D21,human-sc-immunology-spatial-proteomics,uropod_control_S1_R1_001.fastq.gz,uropod_control_S1_R2_001.fastq.gz
uropod_stimulated,D21,human-sc-immunology-spatial-proteomics,uropod_stimulated_S1_R1_001.fastq.gz,uropod_stimulated_S1_R2_001.fastq.gz
Columns not defined in the table below are ignored by the pipeline but can be useful to add extra information for downstream processing.
Column | Required | Description |
---|---|---|
sample | Yes | Custom sample name. This entry will be identical for multiple sequencing libraries/runs from the same sample. Spaces in sample names are automatically converted to underscores (_ ). |
design | Yes | The name of the pixelator design configuration. |
panel or panel_file | Yes | Name of the panel to use. or Path to a CSV file containing a custom panel. |
fastq_1 | Yes | Path to FastQ file for Illumina short reads 1. File has to be gzipped and have the extension “.fastq.gz” or “.fq.gz”. |
fastq_2 | No | Path to FastQ file for Illumina short reads 2. File has to be gzipped and have the extension “.fastq.gz” or “.fq.gz”. Parameter only used if you are running paired-end. |
The panel
and panel_file
options are mutually exclusive. If both are specified, the pipeline will throw an error.
One of them has to be specified.
The pipeline will auto-detect whether a sample is single- or paired-end based on if both fastq_1
and fastq_2
or only fastq_1
is present in the samplesheet.
Multiple runs of the same sample
The sample
identifiers have to be the same when you have re-sequenced the same sample more than once e.g. to increase sequencing depth. The pipeline will concatenate the raw reads before performing any downstream analysis. Below is an example for the same sample sequenced across 3 lanes:
sample,design,panel,fastq_1,fastq_2
uropod_control_1,D21,human-sc-immunology-spatial-proteomics,uropod_control_S1_L001_R1_001.fastq.gz,uropod_control_S1_L001_R2_001.fastq.gz
uropod_control_1,D21,human-sc-immunology-spatial-proteomics,uropod_control_S1_L002_R1_001.fastq.gz,uropod_control_S1_L002_R2_001.fastq.gz
uropod_control_1,D21,human-sc-immunology-spatial-proteomics,uropod_control_S1_L003_R1_001.fastq.gz,uropod_control_S1_L003_R2_001.fastq.gz
Relative paths
Using relative paths in a samplesheet is supported. This make it easier to relocate data since you do not have to edit the paths to files in the samplesheet.
The default behavior is to resolve relative paths based on the directory the samplesheet file is located in.
Given following directory structure:
- data
- samplesheet.csv
- fastq
- sample1_R1.fq.gz
- sample1_R2.fq.gz
You can use following samplesheet:
sample,design,panel,panel_file,fastq_1,fastq_2
sample1,D21,human-sc-immunology-spatial-proteomics,,fastq/sample1_R1.fq.gz,fastq/sample1_R2.fq.gz
Using the --input_basedir
option you can specify a different location that will be used to resolve relative paths.
This location can be a local or a remote path.
For example, using the same samplesheet as above, but with the samplesheet on the local machine and the input data located on an AWS S3 bucket:
- s3://my-company-data/experiment-1/fastq
- sample1_R1.fq.gz
- sample1_R2.fq.gz
nextflow run nf-core/pixelator --input samplesheet.csv --input_basedir s3://my-company-data/experiment-1/
Design
The design
column specifies the name of the pixelator assay design configuration to use.
A list of available designs can be listed by running following command:
pixelator single-cell --list-designs
Currently, a single design is available:
D21
Panels
The panel file contains all information used to link antibodies barcodes to their respective targets. Panel files can be specified in two ways:
- Using a predefined panel name to use the default build in panels.
- Passing a csv file with a customized panel.
Predefined panels can be passed in the panel
field. Custom panels can be passed in the panel_file
field.
Every sample should have either panel
or panel_file
specified.
A list of available panels can be listed by running following command:
pixelator single-cell --list-panels
Currently, a single built-in panel is available:
human-sc-immunology-spatial-proteomics
Running the pipeline
The typical command for running the pipeline is as follows:
nextflow run nf-core/pixelator --input samplesheet.csv --outdir <OUTDIR> -profile docker
This will launch the pipeline with the docker
configuration profile. See below for more information about profiles.
Note that the pipeline will create the following files in your working directory:
work # Directory containing the nextflow working files
<OUTDIR> # Finished results in specified location (defined with --outdir)
.nextflow_log # Log file from Nextflow
# Other nextflow hidden files, eg. history of pipeline runs and old logs.
If you wish to repeatedly use the same parameters for multiple runs, rather than specifying each flag in the command, you can specify these in a params file.
Pipeline settings can be provided in a yaml
or json
file via -params-file <file>
.
Do not use -c <file>
to specify parameters as this will result in errors. Custom config files specified with -c
must only be used for tuning process resource specifications, other infrastructural tweaks (such as output directories), or module arguments (args).
The above pipeline run specified with a params file in yaml format:
nextflow run nf-core/pixelator -profile docker -params-file params.yaml
with params.yaml
containing:
input: './samplesheet.csv'
outdir: './results/'
<...>
You can find an extensive example of a params.yaml
file with all options and
documentation in comments here.
You can also generate such YAML
/JSON
files via nf-core/launch.
Updating the pipeline
When you run the above command, Nextflow automatically pulls the pipeline code from GitHub and stores it as a cached version. When running the pipeline after this, it will always use the cached version if available - even if the pipeline has been updated since. To make sure that you’re running the latest version of the pipeline, make sure that you regularly update the cached version of the pipeline:
nextflow pull nf-core/pixelator
Reproducibility
It is a good idea to specify a pipeline version when running the pipeline on your data. This ensures that a specific version of the pipeline code and software are used when you run your pipeline. If you keep using the same tag, you’ll be running the same version of the pipeline, even if there have been changes to the code since.
First, go to the nf-core/pixelator releases page and find the latest pipeline version - numeric only (eg. 1.3.1
). Then specify this when running the pipeline with -r
(one hyphen) - eg. -r 1.3.1
. Of course, you can switch to another version by changing the number after the -r
flag.
This version number will be logged in reports when you run the pipeline, so that you’ll know what you used when you look back in the future. For example, at the bottom of the MultiQC reports.
To further assist in reproducibility, you can use share and re-use parameter files to repeat pipeline runs with the same settings without having to write out a command with every single parameter.
If you wish to share such profile (such as upload as supplementary material for academic publications), make sure to NOT include cluster specific paths to files, nor institutional specific profiles.
Core Nextflow arguments
These options are part of Nextflow and use a single hyphen (pipeline parameters use a double-hyphen).
-profile
Use this parameter to choose a configuration profile. Profiles can give configuration presets for different compute environments.
Several generic profiles are bundled with the pipeline which instruct the pipeline to use software packaged using different methods (Docker, Singularity, Podman, Shifter, Charliecloud, Apptainer, Conda) - see below.
We highly recommend the use of Docker or Singularity containers for full pipeline reproducibility, however when this is not possible, Conda is also supported.
The pipeline also dynamically loads configurations from https://github.com/nf-core/configs when it runs, making multiple config profiles for various institutional clusters available at run time. For more information and to see if your system is available in these configs please see the nf-core/configs documentation.
Note that multiple profiles can be loaded, for example: -profile test,docker
- the order of arguments is important!
They are loaded in sequence, so later profiles can overwrite earlier profiles.
If -profile
is not specified, the pipeline will run locally and expect all software to be installed and available on the PATH
. This is not recommended, since it can lead to different results on different machines dependent on the computer enviroment.
test
- A profile with a complete configuration for automated testing
- Includes links to test data so needs no other parameters
docker
- A generic configuration profile to be used with Docker
singularity
- A generic configuration profile to be used with Singularity
podman
- A generic configuration profile to be used with Podman
shifter
- A generic configuration profile to be used with Shifter
charliecloud
- A generic configuration profile to be used with Charliecloud
apptainer
- A generic configuration profile to be used with Apptainer
conda
- A generic configuration profile to be used with Conda. Please only use Conda as a last resort i.e. when it’s not possible to run the pipeline with Docker, Singularity, Podman, Shifter, Charliecloud, or Apptainer.
Since Nextflow 23.07.0-edge, Nextflow no longer mounts the host’s home directory when using Apptainer or Singularity.
This causes issues in some dependencies. As a workaround, you can revert to the old behavior by setting the environment variable
NXF_APPTAINER_HOME_MOUNT
or NXF_SINGULARITY_HOME_MOUNT
to true
in the machine from which you launch the pipeline.
-resume
Specify this when restarting a pipeline. Nextflow will use cached results from any pipeline steps where the inputs are the same, continuing from where it got to previously. For input to be considered the same, not only the names must be identical but the files’ contents as well. For more info about this parameter, see this blog post.
You can also supply a run name to resume a specific run: -resume [run-name]
. Use the nextflow log
command to show previous run names.
-c
Specify the path to a specific config file (this is a core Nextflow command). See the nf-core website documentation for more information.
Custom configuration
Resource requests
Whilst the default requirements set within the pipeline will hopefully work for most people and with most input data, you may find that you want to customise the compute resources that the pipeline requests. Each step in the pipeline has a default set of requirements for number of CPUs, memory and time. For most of the steps in the pipeline, if the job exits with any of the error codes specified here it will automatically be resubmitted with higher requests (2 x original, then 3 x original). If it still fails after the third attempt then the pipeline execution is stopped.
To change the resource requests, please see the max resources and tuning workflow resources section of the nf-core website.
Custom Containers
In some cases you may wish to change which container or conda environment a step of the pipeline uses for a particular tool. By default nf-core pipelines use containers and software from the biocontainers or bioconda projects. However in some cases the pipeline specified version maybe out of date.
To use a different container from the default container or conda environment specified in a pipeline, please see the updating tool versions section of the nf-core website.
Custom Tool Arguments
A pipeline might not always support every possible argument or option of a particular tool used in pipeline. Fortunately, nf-core pipelines provide some freedom to users to insert additional parameters that the pipeline does not include by default.
To learn how to provide additional arguments to a particular tool of the pipeline, please see the customising tool arguments section of the nf-core website.
nf-core/configs
In most cases, you will only need to create a custom config as a one-off but if you and others within your organisation are likely to be running nf-core pipelines regularly and need to use the same settings regularly it may be a good idea to request that your custom config file is uploaded to the nf-core/configs
git repository. Before you do this please can you test that the config file works with your pipeline of choice using the -c
parameter. You can then create a pull request to the nf-core/configs
repository with the addition of your config file, associated documentation file (see examples in nf-core/configs/docs
), and amending nfcore_custom.config
to include your custom profile.
See the main Nextflow documentation for more information about creating your own configuration files.
If you have any questions or issues please send us a message on Slack on the #configs
channel.
Azure Resource Requests
To be used with the azurebatch
profile by specifying the -profile azurebatch
.
We recommend providing a compute params.vm_type
of Standard_D16_v3
VMs by default but these options can be changed if required.
Note that the choice of VM size depends on your quota and the overall workload during the analysis. For a thorough list, please refer the Azure Sizes for virtual machines in Azure.
Running in the background
Nextflow handles job submissions and supervises the running jobs. The Nextflow process must run until the pipeline is finished.
The Nextflow -bg
flag launches Nextflow in the background, detached from your terminal so that the workflow does not stop if you log out of your session. The logs are saved to a file.
Alternatively, you can use screen
/ tmux
or similar tool to create a detached session which you can log back into at a later time.
Some HPC setups also allow you to run nextflow within a cluster job submitted your job scheduler (from where it submits more jobs).
Nextflow memory requirements
In some cases, the Nextflow Java virtual machines can start to request a large amount of memory.
We recommend adding the following line to your environment to limit this (typically in ~/.bashrc
or ~./bash_profile
):
NXF_OPTS='-Xms1g -Xmx4g'