Introduction

The pipeline has been set-up to automatically download and process the raw FastQ files from both public and private repositories. Identifiers can be provided in a file, one-per-line via the --input parameter. Currently, the following types of example identifiers are supported:

SRAENADDBJGEOSynapse
SRR11605097ERR4007730DRR171822GSM4432381syn26240435
SRX8171613ERX4009132DRX162434GSE147507
SRS6531847ERS4399630DRS090921
SAMN14689442SAMEA6638373SAMD00114846
SRP256957ERP120836DRP004793
SRA1068758ERA2420837DRA008156
PRJNA625551PRJEB37513PRJDB4176

SRR / ERR / DRR ids

If SRR/ERR/DRR run ids are provided then these will be resolved back to their appropriate SRX/ERX/DRX ids to be able to merge multiple runs from the same experiment. This is conceptually the same as merging multiple libraries sequenced from the same sample.

The final sample information for all identifiers is obtained from the ENA which provides direct download links for FastQ files as well as their associated md5 sums. If download links exist, the files will be downloaded in parallel by FTP. Otherwise they are downloaded using sra-tools.

All of the sample metadata obtained from the ENA will be appended as additional columns to help you manually curate the generated samplesheet before you run the pipeline. You can customise the metadata fields that are appended to the samplesheet via the --ena_metadata_fields parameter. The default list of fields used by the pipeline can be found at the top of the bin/sra_ids_to_runinfo.py script within the pipeline repo. However, this pipeline requires a minimal set of fields to download FastQ files i.e. 'run_accession,experiment_accession,library_layout,fastq_ftp,fastq_md5'. A comprehensive list of accepted metadata fields can be obtained from the ENA API.

If you have a GEO accession (found in the data availability section of published papers) you can directly download a text file containing the appropriate SRA ids to pass to the pipeline:

  • Search for your GEO accession on GEO
  • Click SRA Run Selector at the bottom of the GEO accession page
  • Select the desired samples in the SRA Run Selector and then download the Accession List

This downloads a text file called SRR_Acc_List.txt that can be directly provided to the pipeline once renamed with a .csv extension e.g. --input SRR_Acc_List.csv.

Synapse ids

Synapse is a collaborative research platform created by Sage Bionetworks. Its aim is to promote reproducible research and responsible data sharing throughout the biomedical community. To download data from Synapse, the Synapse id of the directory containing all files to be downloaded should be provided. The Synapse id should be an eleven-characters beginning with syn.

This Synapse id will then be resolved to the Synapse id of the corresponding FastQ files contained within the directory. The individual FastQ files are then downloaded in parellel using the synapse get command. All Synapse metadata, annotations and data provenance are also downloaded using the synapse show command, and are outputted to a separate metadata file. By default, only the md5sums, file sizes, etags, Synapse ids, file names, and file versions are shown.

In order to download data from Synapse, an account must be created and a user configuration file provided via the parameter --synapse_config. For more information about Synapse configuration, please see the Synapse client configuration documentation.

The final sample information for the FastQ files used for samplesheet generation is obtained from the file name itself. The file names are parsed according to the glob pattern *{1,2}*, which returns the sample name, presumed to be the longest possible string matching the glob pattern, with the fewest number of wildcard insertions.

Supported File Names
  • Files named SRR493366_1.fastq and SRR493366_2.fastq will have a sample name of SRR493366
  • Files named SRR_493_367_1.fastq and SRR_493_367_2.fastq will have a sample name of SRR_493_367
  • Files named filename12_1.fastq and filename12_2.fastq will have a sample name of filename12

Samplesheet format

As a bonus, the columns in the auto-created samplesheet can be tailored to be accepted out-of-the-box by selected nf-core pipelines, these currently include:

You can use the --nf_core_pipeline parameter to customise this behaviour e.g. --nf_core_pipeline rnaseq. More pipelines will be supported in due course as we adopt and standardise samplesheet input across nf-core. It is highly recommended that you double-check that all of the identifiers required by the downstream nf-core pipeline are accurately represented in the samplesheet. For example, the nf-core/atacseq pipeline requires a replicate column to be provided in it’s input samplehsheet, however, public databases don’t reliably hold information regarding replicates so you may need to amend these entries if your samplesheet was created by providing --nf_core_pipeline atacseq.

From v1.9 of this pipeline the default strandedness in the output samplesheet will be set to auto when using --nf_core_pipeline rnaseq. This will only work with v3.10 onwards of nf-core/rnaseq which permits the auto-detection of strandedness during the pipeline execution. You can change this behaviour with the --nf_core_rnaseq_strandedness parameter which is set to auto by default.

Bypass FTP data download

If FTP connections are blocked on your network use the --force_sratools_download parameter to force the pipeline to download data using sra-tools instead of the ENA FTP.

Downloading dbGAP data with JWT

As of v1.10.0, the SRA Toolkit used in this pipeline can be configured to access protected data from dbGAP using a JWT cart file on a supported cloud computing environment (Amazon Web Services or Google Cloud Platform). The JWT cart file can be specified with --dbgap_key /path/to/cart.jwt.

Note that due to the way the pipeline resolves SRA IDs down to the experiment to be able to merge multiple runs, your JWT cart file must be generated for all runs in an experiment. Otherwise, upon running prefetch and fasterq-dump, the pipeline will return a 403 Error when trying to download data for other runs under an experiment that are not authenticated for with the provided JWT cart file.

Users can log into the SRA Run Selector, search for the dbGAP study they have been granted access to using the phs identifier, and select all available runs to activate the JWT Cart button to download the file.

To test this functionality in your cloud computing environment, you can use the protected dbGAP cloud testing study with experiment accession SRX512039:

  • On the SRA Run Selector page for SRX512039, select the two available runs (SRR1219865 and SRR1219902) and click on JWT Cart to download a key file called cart.jwt that can be directly provided to the pipeline with --dbgap_key cart.jwt
  • Click on Accession List to download a text file called SRR_Acc_List.txt with the SRR IDs that can be directly provided to the pipeline with --input SRR_Acc_List.txt

Running the pipeline

The typical command for running the pipeline is as follows:

nextflow run nf-core/fetchngs --input ./ids.csv --outdir ./results -profile docker

This will launch the pipeline with the docker configuration profile. See below for more information about profiles.

Note that the pipeline will create the following files in your working directory:

work                # Directory containing the nextflow working files
<OUTDIR>            # Finished results in specified location (defined with --outdir)
.nextflow_log       # Log file from Nextflow
# Other nextflow hidden files, eg. history of pipeline runs and old logs.

If you wish to repeatedly use the same parameters for multiple runs, rather than specifying each flag in the command, you can specify these in a params file.

Pipeline settings can be provided in a yaml or json file via -params-file <file>.

Warning

Do not use -c <file> to specify parameters as this will result in errors. Custom config files specified with -c must only be used for tuning process resource specifications, other infrastructural tweaks (such as output directories), or module arguments (args).

The above pipeline run specified with a params file in yaml format:

nextflow run nf-core/fetchngs -profile docker -params-file params.yaml

with params.yaml containing:

input: './ids.csv'
outdir: './results/'
<...>

You can also generate such YAML/JSON files via nf-core/launch.

Updating the pipeline

When you run the above command, Nextflow automatically pulls the pipeline code from GitHub and stores it as a cached version. When running the pipeline after this, it will always use the cached version if available - even if the pipeline has been updated since. To make sure that you’re running the latest version of the pipeline, make sure that you regularly update the cached version of the pipeline:

nextflow pull nf-core/fetchngs

Reproducibility

It is a good idea to specify a pipeline version when running the pipeline on your data. This ensures that a specific version of the pipeline code and software are used when you run your pipeline. If you keep using the same tag, you’ll be running the same version of the pipeline, even if there have been changes to the code since.

First, go to the nf-core/fetchngs releases page and find the latest pipeline version - numeric only (eg. 1.3.1). Then specify this when running the pipeline with -r (one hyphen) - eg. -r 1.3.1. Of course, you can switch to another version by changing the number after the -r flag.

This version number will be logged in reports when you run the pipeline, so that you’ll know what you used when you look back in the future. For example, at the bottom of the MultiQC reports.

To further assist in reproducbility, you can use share and re-use parameter files to repeat pipeline runs with the same settings without having to write out a command with every single parameter.

Tip

If you wish to share such profile (such as upload as supplementary material for academic publications), make sure to NOT include cluster specific paths to files, nor institutional specific profiles.

Core Nextflow arguments

Note

These options are part of Nextflow and use a single hyphen (pipeline parameters use a double-hyphen).

-profile

Use this parameter to choose a configuration profile. Profiles can give configuration presets for different compute environments.

Several generic profiles are bundled with the pipeline which instruct the pipeline to use software packaged using different methods (Docker, Singularity, Podman, Shifter, Charliecloud, Apptainer, Conda) - see below.

Info

We highly recommend the use of Docker or Singularity containers for full pipeline reproducibility, however when this is not possible, Conda is also supported.

The pipeline also dynamically loads configurations from https://github.com/nf-core/configs when it runs, making multiple config profiles for various institutional clusters available at run time. For more information and to see if your system is available in these configs please see the nf-core/configs documentation.

Note that multiple profiles can be loaded, for example: -profile test,docker - the order of arguments is important! They are loaded in sequence, so later profiles can overwrite earlier profiles.

If -profile is not specified, the pipeline will run locally and expect all software to be installed and available on the PATH. This is not recommended, since it can lead to different results on different machines dependent on the computer enviroment.

  • test
    • A profile with a complete configuration for automated testing
    • Includes links to test data so needs no other parameters
  • docker
    • A generic configuration profile to be used with Docker
  • singularity
    • A generic configuration profile to be used with Singularity
  • podman
    • A generic configuration profile to be used with Podman
  • shifter
    • A generic configuration profile to be used with Shifter
  • charliecloud
    • A generic configuration profile to be used with Charliecloud
  • apptainer
    • A generic configuration profile to be used with Apptainer
  • conda
    • A generic configuration profile to be used with Conda. Please only use Conda as a last resort i.e. when it’s not possible to run the pipeline with Docker, Singularity, Podman, Shifter, Charliecloud, or Apptainer.

-resume

Specify this when restarting a pipeline. Nextflow will use cached results from any pipeline steps where the inputs are the same, continuing from where it got to previously. For input to be considered the same, not only the names must be identical but the files’ contents as well. For more info about this parameter, see this blog post.

You can also supply a run name to resume a specific run: -resume [run-name]. Use the nextflow log command to show previous run names.

-c

Specify the path to a specific config file (this is a core Nextflow command). See the nf-core website documentation for more information.

Custom configuration

Resource requests

Whilst the default requirements set within the pipeline will hopefully work for most people and with most input data, you may find that you want to customise the compute resources that the pipeline requests. Each step in the pipeline has a default set of requirements for number of CPUs, memory and time. For most of the steps in the pipeline, if the job exits with any of the error codes specified here it will automatically be resubmitted with higher requests (2 x original, then 3 x original). If it still fails after the third attempt then the pipeline execution is stopped.

To change the resource requests, please see the max resources and tuning workflow resources section of the nf-core website.

Custom Containers

In some cases you may wish to change which container or conda environment a step of the pipeline uses for a particular tool. By default nf-core pipelines use containers and software from the biocontainers or bioconda projects. However in some cases the pipeline specified version may be out of date.

To use a different container from the default container or conda environment specified in a pipeline, please see the updating tool versions section of the nf-core website.

Custom Tool Arguments

A pipeline might not always support every possible argument or option of a particular tool used in pipeline. Fortunately, nf-core pipelines provide some freedom to users to insert additional parameters that the pipeline does not include by default.

To learn how to provide additional arguments to a particular tool of the pipeline, please see the customising tool arguments section of the nf-core website.

nf-core/configs

In most cases, you will only need to create a custom config as a one-off but if you and others within your organisation are likely to be running nf-core pipelines regularly and need to use the same settings regularly it may be a good idea to request that your custom config file is uploaded to the nf-core/configs git repository. Before you do this please can you test that the config file works with your pipeline of choice using the -c parameter. You can then create a pull request to the nf-core/configs repository with the addition of your config file, associated documentation file (see examples in nf-core/configs/docs), and amending nfcore_custom.config to include your custom profile.

See the main Nextflow documentation for more information about creating your own configuration files.

If you have any questions or issues please send us a message on Slack on the #configs channel.

Azure Resource Requests

To be used with the azurebatch profile by specifying the -profile azurebatch. We recommend providing a compute params.vm_type of Standard_D16_v3 VMs by default but these options can be changed if required.

Note that the choice of VM size depends on your quota and the overall workload during the analysis. For a thorough list, please refer the Azure Sizes for virtual machines in Azure.

Running in the background

Nextflow handles job submissions and supervises the running jobs. The Nextflow process must run until the pipeline is finished.

The Nextflow -bg flag launches Nextflow in the background, detached from your terminal so that the workflow does not stop if you log out of your session. The logs are saved to a file.

Alternatively, you can use screen / tmux or similar tool to create a detached session which you can log back into at a later time. Some HPC setups also allow you to run nextflow within a cluster job submitted your job scheduler (from where it submits more jobs).

Nextflow memory requirements

In some cases, the Nextflow Java virtual machines can start to request a large amount of memory. We recommend adding the following line to your environment to limit this (typically in ~/.bashrc or ~./bash_profile):

NXF_OPTS='-Xms1g -Xmx4g'